Ac Motor Type Barite Raymond Mill Raw Syenite Talc Production Line Grinding Raymond Mill Price

Ac Motor Type Barite Raymond Mill Raw Syenite Talc Production Line Grinding Raymond Mill Price

Product Description

Barite looks like crystal, so barite is also called crystal stone. Barite has many uses and needs to be ground into powder or the main barium sulfate contained in it needs to be extracted, so barite must be ground into powder before it can be widely used.

Raymond mill is widely used for non-flammable and non-explosive materials with Moh hardness below grade 9.3 and water content less than 6%.such as: Quartz, recrystallization, calcite, potassium feldspar, talc, marble, limestone, dolomite, fluorite, lime, activated clay, activated carbon, bentonite, kaolin, cement, phosphate rock, gypsum, graphite, glass, titanium ore, copper ore, chrome ore, manganese ore, refractory materials, insulation materials, coal tar, coal powder, carbon black, clay, titanium dioxide, iron oxide. The final size ranges from 60 mesh to 325 mesh (0.044mm to 0.125mm), and some parts can be 1000 mesh (0.013mm)

Grinding mill plant process introduction

The first stage: Crushing
The Calcium carbonate is crushed by the crusher to the feed fineness (15mm-50mm) that can enter the mill.
The second stage: Milling
The crushed small pieces of bentonite are sent to the silo by the elevator, and then sent to the grinding chamber of the mill by the vibrating feeder for grinding
The third stage: Grading
The powdered material is separated by the classifier, the unqualified powder will be returned to the grinding mill chamber for re-milling.
The fourth stage: Collecting
Fine powder complies with the fineness and airflow go through the pipe into the dust collector for separation and collection. The finished powder will be transmitted to bucket elevator by screw conveyor and lifted into Silo for storage by Bucket elevator , then packed uniformly by powder tanker or automatic packing machine.

Technical Data

Work Principle

Raymond Mill's working principle is that the grinding roller is rolled tightly on the grinding ring under the action of centrifugal force. The shovel scoops the material to the middle of the grinding roller and the grinding ring. The material is broken into powder under the action of the grinding pressure, and then Under the action of the fan, the powdered material is blown through the analyzer, and the fineness-required material passes through the analyzer. The regrind chamber can no longer meet the required requirements and continue to be ground. The material of the analyzer enters the cyclone separator and is collected and collected. The exhaust uses industrial filter cloth to separate exhaust air into powder.

Customer Cases

Our operation principle is to bring the maximum value for customers by quality and service. We are not only producing and selling productions, but research, program designing, delivering, installing, after sell service, parts supplying, skill training, etc. Also we can send one or two technician to supervise installation, commissioning, trial-run, and training local workers.