Electronic LED Fluid Sealant High Temperature Resistance Thermal Conductivity Flame Retardant Waterproof Insulation AB Glue
Other recommendations for your business
Contact us
Quik Detail
| CAS No. | 56-33-7 |
|---|---|
| Other Names | Two-component silicone electronic potting compound |
| MF | C16H22OSi2 |
| EINECS No. | 231-861-8 |
| Place of Origin | Guangdong |
| Classification | Double Components Adhesives |
| Main Raw Material | Silicone |
| Usage | electronic |
| Brand Name | JSYA |
| Model Number | KOS-J-3022 |
| Import or not | No |
| Resin adhesive classification | Powder filling silicone rubber |
| Adhesive material | Electronic components |
| Operating temperature | 200℃ |
| Viscosity | 2200 |
| Curing Method | Cold curing cold setting |
| Shelf Life | 6 months |
| Function | Potting insulation heat conduction |
| Scope of use | Used in wall washer, digital tube, LED lighting, pixel tube, etc. |
| Featured services | Technical support |
Product Detail
Condensation type two-component fluid sealant
1 . Product Introduction :
KOS-J-3022 Wall washer potting silica gel is a cold curing cold setting condensation type two-component low viscosity Organosilicone potting sealant, which has good resistance to cold and hot changes, high and low temperature resistance ( In -40~ 150'C Maintain elasticity and stability for a long time, and pay attention to the phenomenon of returning to the original in a closed environment. ) , UV resistance, aging resistance, insulation, moisture resistance, earthquake resistance, creepage resisted resistance and chemical medium resistance, etc., will not cause corrosion to plastic, metal and other materials, can be well attached to electronic accessories materials.
2 , typical use :
Electronic Components, LED Outdoor lighting potting ( Such as outdoor LED Wall washer. Underwater lamp potting protection ) .
3 . Operation instructions :
3.1 , before mixing :
a , component “A” Stir with Blender ( Speed setting :1500-2000 Turn / The mixing time is 3-5 Minutes ) . The agitator should be placed at a slightly off position in the center of the liquid level. The depth of the agitator inserted into the glue is about the height of the glue. 2/3 .
b , component “B" The container should be fully shaken in the sealed state before use.
3.2 , when mixing : By weight ratio “A:B=10:1” Will A/B Glue into a clean container ( Feed according to the required quantity ) And timely and quickly stir evenly ( Stirring time 3-7 Minutes are preferred. ) . 3.3 , evenly mixed glue must be in the gel ( Obvious thickening ) Use it before, otherwise it will cause waste of glue or poor potting effect.
4 , packaging specifications :
27.5Kg/ Set (A Component 25Kg+B Component 2.5Kg)
5 , storage :
Store in a cool and dry place. The storage period is 6 Months (25 ℃ ) .
6 . Precautions :
a , sizing materials should be sealed storage, mixed sizing materials should be used up at a time to avoid waste.
b , this product is non-dangerous goods, but do not enter the mouth and eyes.
c , after long storage, the filler in the glue will have settlement and stratification phenomenon ( This is normal ) , after mixing evenly, the product performance will not be affected :
d , in special circumstances, if you need to adjust A/B Glue ratio, the sample after adjustment should be tested and applied again. ( Just so-so B The more components are used, the faster the surface drying curing is and the shorter the operation time is. )
e , the higher the ambient temperature, the faster the curing, and the shorter the operation time ; Conversely, the lower the ambient temperature, the slower the curing and the longer the operation time.
f . In practical application, it needs to be fully verified or communicated with our engineering staff before batch application.
