JH-5-WY 58 KW Fully Automatic One-Stage Flame Control Waste Oil Burner for Boiler Parts
Other recommendations for your business
Contact us
Quik Detail
| warranty | 3 months |
|---|---|
| Weight (kg) | 14 |
| video outgoing-inspection | Provided |
| machinery test report | Provided |
| place of origin | Hebei, China |
| brand name | Jihang |
| type | Oil Burner |
| Output power | 46-174 KW |
| Control mode | Fully automatic two-stage flame control |
| Applicable fuel | Diesel oil,used oil,tire oil(Flash point below 75) |
| Fuel consumption | 9.5-14.3 kg/h |
| Standard inlet pressure | 0 Pa |
| Adaptable pressure range | 0.6-1.2 MPa |
| Applicable power supply | AC220V/50Hz/1O |
| Motor power | 0.18 KW |
| Main Body Size of Burner | 530*450*300mm |
| Burner weight | 11-12 kg |
| Condition | New |
| Showroom Location | Philippines, Mexico, Russia, Malaysia |
| Applicable Industries | hotels, Building Material Shops, Manufacturing Plant, Food & Beverage Factory, Steam Boiler |
Product Detail
JH-5-WY 58 KW Fully Automatic One-Stage Flame Control Waste Oil Burner For Boiler Parts
The waste oil burner uses air to atomize the waste oil, and then ignites the oil through the electronic igniter and fully burns it.
Advantages:
1. This burner is equipped with a pneumatic solenoid valve, which can automatically control the waste oil into the oil tank. When the oil volume in the oil tank is lower than the lowest position, it can automatically refuel. When it reaches the highest position of the oil tank, it can stop refuelling, which is convenient and flexible.
2. Customers can also customize the remote control port to meet the diversified needs of customers.
3. It can burn tire oil , waste oil and other low-cost oil, greatly reducing the cost of customers.
4. It is connected with the air compressor, so that the atomization is more sufficient and the combustion is more thorough, which greatly reduces the time for manual cleaning of the nozzle in the later stage.
Note:
When customers choose waste oil burner, please inform our customer service of several characteristics of this fuel, such as calorific value, viscosity, flash point, etc. If not clear, you can contact our customer service to help you confirm to ensure that you can use it normally after purchase.
| Technical parameters | ||||||
| Model | JH-5-WY | JH-10-WY | JH-15-WY | JH-30-WY | JH-35-WY | |
| Output power | KW | 46-58 | 58-116 | 81-175 | 116-350 | 175-400 |
| 104Kcal/h | 3-5 | 5-10 | 7-15 | 10-30 | 15-35 | |
| Control mode | Fully automatic single stage flame control | Fully automatic two-stage flame control | ||||
| Applicable fuel | Diesel oil,Used oil,tire oil(Flash point below 75) | |||||
| Fuel consumption | kg/h | 4.7 | 9.5 | 14.5 | 28.6 | 33.5 |
| Fuel Preheater power | KW | 0.3 | ||||
| Dimensions of air intake | 8# | |||||
| Adaptable pressure range | MPa | 0.6-1.2 | ||||
| Design fuel calorific value | Kcal/Nm³ | 10500 | ||||
| Adapt to ambient temperature | ℃ | -15~60 | ||||
| Applicable power supply | AC220V/50Hz/1O | |||||
| Motor power | KW | 0.18 | 0.18 | 0.18 | 0.37 | 0.55 |
| Safety Protection Level | IP | 40(The protection level can be improved according to the order requirement.) | ||||
| Flange Installation Form | Sliding adjustable flange | |||||
| Fuel access port size | 1/2 | |||||
| Main Body Size of Burner (Length * Width * Height) | mm | 480*450*300 | 530*450*300 | 530*450*300 | 750*600*330 | 880*600*330 |
| Burner weight | kg | 11 | 12 | 13 | 19 | 22 |
PRODUCT PICTURES
1.Is your company a manufacturer or a distributor?
Answer: our company is a manufacturer with a complete sales, production, technology and after-sales service team.
2.What are the payment methods?
Answer: orders less than $500 can be remitted by Western Union, but only by international express, such as DHL, Fex, UPS, etc. large orders support T / T payment, and the final payment is settled before shipment.
3.Warranty policy: except for oil pump, nozzle, solenoid valve (oil burner), ignition needle and ignition line, the whole burner is guaranteed for one year, and the shell of the sensor is burnt out due to thermal radiation, which is not covered by warranty.