Dual Head Manual Arm Type Stethoscope Class II Blood Pressure Monitor

 2 in 1

 Dual Listening 2-in-1 Set:

 Neutral Blood Pressure Monitor:

Instructions:

1.Product Introduction:

Easy to Operate,The measurement data is accurate,Made entirely of metal,Durable and long-lasting.The sphygmomanometer is a model specifically designed for home use by medical device manufacturers who produce tabletop blood pressure monitors,Compact and convenient to carry,High measurement accuracy,Its usage method and accuracy during measurement are consistent with the mercury sphygmomanometer used by doctors in hospitals.

2,Work Principle:

Arm Band Inflatable Compression Measurement Site Blocking Current,Then release the gas through the arm strap,Make the blood flow again.Blood pressure measurement is determined based on the sound of blood flow or changes in blood vessel vibrations when blood flows again.

3,Measurement range:

0-300mmHg(0-40kPa)

4,Basic error:

National Standard Error±3.75mmHg,Factory Error±2mmHg

5,Configuration:

5.1:Watch Head:Material:Aluminum Alloy,Zinc alloy default aluminum alloy color:Black,blue,Gray or customer specified

5.2:Inner Capsule:Material:Latex,DefaultPVCColor:Black or customer specified

5.3:Press Ball:Material:Latex,DefaultPVCColor:Black or customer specified

5.4:Intake Valve:Material:Zinc Alloy,Copper,Plastic default:Zinc alloy electroplating treatment

5.5Tail Valve:Copper or plastic default:Copper Electroplating Process

5.6:Bag:Leather Bag PrintableLOGODefault is standard printing

5.7Strap:A,Color:Armband color specified by customer, default is blackB,Size:Optional sizes are divided into(Adult,Adult,Youth,Children,The default for infants is set to adultsC,Material:Nylon,Cotton,PUThe default is nylonD,Printing:PrintableLOGO E,Strap with Iron Ring

5.8:Listen:Specifications:Ordinary Single Listening,Ordinary Dual Listening Material:Aluminum Alloy,Zinc Alloy Surface Treatment:Aluminum Alloy Zinc Oxide Alloy Electroplating Default:Aluminum Alloy Ordinary Single Speaker

5.9:YTube(Stethoscope Tube):A,Material:PVC B,Color:Customer specified default black

5.10:Ear Hooks:A,Material:Aluminum Alloy,Copper,Stainless SteelB,Surface Treatment:Aluminum Alloy,Copper Electroplating Process,Stainless Steel Original Color

5.11:Packaging:1pcsBoxed Color Box Packaging Customer-Specified Printing Default Neutral Packaging

6,Product Features:
    A blood pressure monitor is a diagnostic device used to measure human blood pressure.Has a small size,Features of being lightweight to carry,The usage effect is the same as a mercury sphygmomanometer,And it adopts a mercury-free design,Blood Pressure Measurement,Safe Reliable,Widely applicable for home users.
7,Things to Consider When Measuring Blood Pressure:
    Blood pressure should be measured in a quiet environment.Because human blood pressure changes throughout the day, it's best to measure at the same time every day.The subject should remain relaxed and quiet,It's best not to have conversations or activities.It's advisable to wear loose-fitting clothing.

8,Measurement Method:

    8.1.Before using the blood pressure monitor,First, let's check,Normal Blood Pressure Monitor with Dial Pointing at"0"Bit,After pressurization, the response is flexible,And still able to return to the original state"0"Bit.
    8.2.Please sit down at the table,Place your left arm gently on the table,Maintain a very comfortable posture.
    8.3.Adjust the arm to be at heart level,If the height is not enough, you can add a soft pad under the arm.
    8.4.Spread the armband flat,Align the middle part of the air belt with the brachial artery,The lower edge of the armband reaches above the elbow socket2To3The centimeter binding should be around the upper arm without being too tight or too loose; generally, it should allow two fingers to fit under the sleeve,To avoid affecting accuracy.
    8.5.Insert the stethoscope's earpiece into the armband,Place it on the brachial artery at the elbow.
    8.6.Slowly inflate the latex ball into the arm band,Pay attention to monitoring at the same time,Wait until the humeral artery pulsation disappears before increasing the pressure2.5kPa-4kPa(20mmHg-30mmHg)Stop pumping.
    8.7.After the pressure stops,per second0.3kPa-0.6kPa(2mmHg-4mmHg)slowly release the air from the armband,Lower the blood pressure monitor needle gradually.
    8.8.The pressure value indicated by the needle when the first pulsation sound is heard through the stethoscope during descent,It is the systolic blood pressure.
    8.9.When the pulsatile sound gradually strengthens and then turns into noise,The tone suddenly became muffled,Gradually disappearing,When there is no sound,.
    *When measuring blood pressure,Generally should be repeated2To3Times,Average the obtained readings as blood pressure values.
    *The back of the blood pressure monitor case has a metal hook attached,Can be hung on the armband when in use,Makes reading more convenient. 
    *Blood Pressure Monitor Arm Strap with Nylon Buckle,The strap is convenient

Model:C206C0F201

Certificate:CE

Strap:Nylon,40*500MM

Ball,bag:PVC

Measurement range:0-300mmHg

Other:Ordinary Valve

Stethoscope:Stethoscope for Single Use

Individually packaged:Unisex Color Box,Leather Bag

Manual Blood Pressure Monitor Box Specifications:

Product Weight:443G       Product Dimensions:195*210*70MM

Single Listening Two-in-One Blood Pressure Monitor Box Specification:54*35*37cm   50Set/Box  21kg

Aluminum Single Speaker Box Specifications(With Color Box):52*29*43cm   100Set/Box  12kg

Aluminum Dual Speaker Box Specifications(With Color Box):52*29*43cm   100Set/Box  14kg