Industry KQ330 power line carrier data transceiver module KQ-130S for powerline communication module
Other recommendations for your business
Contact us
Quik Detail
| Place of Origin | China |
|---|---|
| Brand Name | Original |
| Model Number | KQ-130S |
| Mounting Type | standard |
| Description | KQ330 power line carrier data transceiver module |
Product Detail
XUJIAHENG ELECTRONICS CO., LIMITED aims to establish a win-win and long-term cooperative relationship with overseas customers with the principles of "good reputation, reliable quality, and fast delivery".
Why choose us?
Millions of parts in stock
MOQ 1 PCSCompetitive offer
Available for immediate shipment
Quick delivery, lower shipping costs
Long-term supply shortage components
One-stop equipment for BOM list materials
100+ professional business teams, 24-hour quotation service
| KQ-130F is a single column 9-pin small volume high-performance zero crossing carrier data transceiver module produced on the basis of independently developed carrier chips. It is a cost-effective carrier module specially designed and developed for reliable data transmission in environments with strong interference, strong attenuation, and long-distance requirements on 220V AC. The KQ-130F carrier module includes many complex peripheral circuits such as carrier drive, coupling, filtering, and lightning protection. Users only need to provide a single 5V power supply, connect two signal lines (TX, RX) to the microcontroller, and directly connect 220V (without distinguishing between live and neutral wires) through the two AC terminals of the module, achieving a fully transparent way of transmitting and receiving data through power carrier communication like 485 communication. The KQ-130F carrier module is suitable for meter reading, streetlights, smart homes, fire protection, building control, and other application fields that require power line transmission of data. The transmission distance can reach 1.5Km. The KQ-130F series zero crossing carrier data transceiver module is a true carrier module based on zero point modulation and demodulation. The anti-interference ability and transmission distance are far superior to many so-called zero crossing modules on the market. 1, KQ-130F series performance: 1. The carrier board integrates the KQ-330F module and peripheral circuits, without the need for other coupling components, and can be directly connected to 220V AC power for use. The external dimensions are 53 × 38 × 17 millimeters (L × D × H), with a single row of pin leads (as shown in the figure below). Pin 1 and Pin 2 are connected to a 220V AC power supply without direction (Pin 1, Pin 2 spacing 2X0.1 inches), Pin 2, Pin 3 spacing 1.1 inches, and the rest of the pins spacing 0.1 inches. 2. Operating frequency of 120-135KHZ, interface baud rate of 9600bps. The actual baud rate is 100bps. 3. The maximum length of a continuous transmission frame is ≤ 252 bytes, and the length of a continuous transmission frame from 1 to 252 is defined by the user. The module will not send any extra data 4. Receiving sensitivity ≤ 1mV 5. Out of band suppression capability ≥ 60 dB 6. Bandwidth ≤ 10 KHZ 7. Insulation resistance 500V ≥ 500M Ω 8. Power supply: DC+5V. When receiving: ≤ 11mA. When sending: ≤ 230mA 9. Power frequency insulation withstand voltage: There is no breakdown or leakage current tested between AC and GND at 3000V for 1 minute. 10. Lightning protection: The TVS tube protection inside the board is designed according to the principles of wide temperature range, high voltage resistance, and high voltage impact resistance, from PCB wiring selection to component selection. 11. Working temperature: -25 ℃~70 ℃, humidity ≤ 90% 1P-AC: 220V AC voltage live wire (or neutral wire) 2P-AC: Zero wire (or live wire) for 220V AC voltage 3P -+5V:+5V transmission power supply (210mA), if single data is received, it can be suspended to reduce power consumption 4P - GND: Digital circuit ground wire 5P -+5V:+5V working power supply 11mA, minimum working voltage can reach 3.3V but not recommended 6P-RX: TTL level, carrier data input, connected to TXD of microcontroller 7P-TX: TTL level, carrier data output, connected to RXD of microcontroller 8P - MODE: Mode selection, floating or connected 5V for high level, grounded for low level 9P-NC/RST: Used when the reset pin (low level active) frequently switches modes during operation. This function is not required, the pins should be suspended |
Q: What company do we belong to?
A: We are a manufacturer and a trader.
Q: How long is our delivery time?
A: This depends on the quantity of the goods you ordered, we have stock, usually 3-15 days delivery time.
Q: How to order?
A: Please mail your order or request to us, and tell us the following information: shipping details, including company name, address, person, phone number, quantity.
Q:What about the after-sales services?
A:Our company is responsible for the supplied product within its usage life, and if you have any questions, we will be reply you within 24 hours.
Q:What is the minimum order quantity?
A:We accept orders from 1 set, please feel free to inquire.
Q: How many discounts are available for ordering products?
A: As long as you provide us with your demand, we will give you the best price.
Q: What can you buy from us?
A:IGBT/Module/Development Board/HF/RF Device/Microwave/MICROCONTROLLER/Amplifier/Integrated circuit, Electronic components/LED/LCD/Relay/Connector/Capacitance/CPU/MEMORY/Industrial control/Military series products....