RAIZI Pneumatic/air Wet Polisher/grinder/sander
Other recommendations for your business
Contact us
Quik Detail
| place of origin | Shandong, China |
|---|---|
| brand name | RAIZI |
| model number | RZ5500AR |
| type | Air Pump |
| Air Consumption | 16cfm, 16cfm |
| no-load speed | 0-5500RPM |
| color | Blue |
| Air Pressure | 90Psi(621kpa) |
| Shaft Thread | 5/8"-11; M14 |
| Max Pad Diameter | 5" |
Product Detail
Rear-Exhaust Air Wet Polisher
The Pneumatic Water Sander is a versatile sander, which can be used for any hard material and any profile to sand the uneven surface, especially, ideal to sand the marble, stone etc., construction material.
1. Low vibrate and noise with excellent performance.
2. Gravity casting housing carries long duration of tool.
3. Centre water feed function reduces dust, and improves environment protection.
4. Water valve can be adjusted for variable water-flow.
5. Includes a 100mm rubber back-up pad, a reversible side handle, exhaust muffler, air hose adapter and water valve with hose adapter.
6. Both 3" and 4" pads are available.
7. Light weight and compactable design are also suitable for single-hand operation.
8. Rubber sleeve keeps hands from getting cold.
|
Item No. |
RZ5500AR |
|
Air Consumption |
16cfm(0.45m³/min) |
|
Air Pressure |
90Psi(621kpa) |
|
Shaft Thread |
5/8"-11; M14 |
|
Air Inlet |
1/4" Npt |
|
Max Pad Diameter |
5" |
|
No Load Rev Speed |
500-5500rmp |
|
N.W/G.W |
2kgs/3kgs |
Compressed Air System
Components And Network:
1. INTAKE AIR FILTERS
Prevent dust and other contaminats from entering compressor
2. COMPRESSOR
The filtered air is compressed (typically 80 psig [5.5 bar]-110 psig [7.6 bar] using different types of compressor such as reciprocating, vane, screw or, centrifugal.
COMPRESSOR SELECTION CRITERIA
A) COMPRESSOR TYPE-Recommendation:
0 to 80 PSIG (5.5 Bar): single stage compressor.
80 to 250 PSIG (17.2 Bar) / continuous usage of tools: two-stage compressor.
B) TOTAL AIR CONSUMPTION-Determine the total demand SCFM (LPM).
Factors to consider: demands of all equipment, tools, and other air consumption variables.
C) COMPRESSOR CAPACITY-HORSEPOWER (HP)
Determined total demand SCFM (LPM): D
Add approximately 20% for system variables: D1=Dx1.2
If ≤ 100 SCFM (2,832LPM): hp= D1/4
If ›100 SCFM (2,832LPM): hp= D1/5
3. REFRIGERATED DRYER
Compression leaves the air hot and wet. It reduces the temperature of the air and removes the excessive water
4. RECEIVER
Air receiver is provided as storage tp reduce fluctuations and maintain a smooth flow in the compressed system.
RECEIVER TANK SIZE
The more receiver the better the system.
5. DISTRIBUTION
The link between supply, storage and demand. To supply adequate amount of compressed air at the required pressure to all work station.
6. POINT-OF USE APPLICATION:
Filter-Regulator-Lubricator (FRL):
FRL are needed to ensure that a tool is receiving a clean, lubricated supply of air at the proper pressure. The filer removes water, pipe deposits, rust and condensation from entering the air motor. The regulator controls air pressure to the tool. The lubricator provides a nearly constant oil/air ratio of air flows.
The oil drip rate: one drop per minute for each 20 SCFM (566 LPM)
FACTORS RELATE TO ADEQUATE AIR FLOW
·A hose of excessive length and / or insufficient diameter can restrict the air flow.
·If you are using an air tool on a hose over 25 ft. long, it is advisable to increase the bore of the hose to the next large size available ie. 1/4” increases to 3/8”. This will ensure adequate pressure and volume of air to power the machine.
·Usage of air inline filter/ regulator.
·Total number of air connections/ fitting being used.
·Prevent any blockage of air flow. Maintain adequate air flow.
·Remove or reduce condensation from the air supply.
·Regular check for leaks in all piping, joints, drains, relief valves, flexible hoses.
·Note to drain water from the Drain Valve regularly.
AIR SYSTEM PREVENTATIVE MAINTENANCE
1. Water in the compressor tank will cause serious corrosion to your air tools and should be drained daily to avoid excessive water in your air supply. Dirty wet air will rapidly shorten the life of your air tools.
2. Supply tool with 90 psi (6.2 bar) of clean, dry air. Higher pressure drastically reduces tool life.
3. Do not install a quick coupler directly into the tool throttle handle.
4. Prevent contaminates from entering the air motor.
5. Every day before use, remove the tool from air line and pour a tablespoon oil into the machine and operate at low speed to ensure lubrication of all moving parts.
6. Lubrication: A air motor, apply 2-3 drops SAE#10 into the air inlet before and after use.
Gears, bearing, sleeves, and sliders need to be lubricated as well.
7. Disassemble and inspect air motor and governor assembly every three months if the tool is used every day. Replace damaged or worn parts.
8. Use original factory supplied tools, spare parts and accessories.
Do not alter or modify the unit from the original design or function.
Packaging: Double layer carton box packaging
Shipping: Within 15&20 days after receipt of payment
Raizi Tool Co.,Ltd is a professional manufacturer and supplier who mainly focuses on diamond tools, wet polishers and floor grinding machines for stone fabrication, concrete floor restoration and stainless steel grinding industry in China.
In stone fabrication industry, we bring high quality cost-effective wet polisher, wet grinder & wet cutter; diamond tools for stone or concrete countertop fabrication and granite, marble and concrete floor restoration; auxiliary tools in stone seam setter, mitre clamp, stone slab lifter and sink hole saver.
Raizi diamond tools can be used for concrete grinding, honing and polishing, engineered stone polishing, granite polishing and marble polishing. Raizi Tool is proud of the quality of Diamond Polishing Pads, Diamond Grinding Cup Wheels, Diamond Router Bits, Diamond hand profilers or Diamond Hand Router Bits, Diamond Core Drill Bits, Stone wet Polishers and Grinders and so on.
In concrete floor restoration industry, we bring various diamond tools for surface preparation, concrete grinding and concrete polishing.
We manufacture PCD diamond Scraper inserts, diamond grinding scrapers and diamond grinding shoes. Our newly developed ceramic diamond tools for polishing include EdgemaxxTM concrete edge finishing cup wheel, STCDTM Transitional Ceramic polishing pads for concrete, "Sharpmaxx" new hybrid concrete floor polishing pad and resin bond floor polishing pads. All of the diamond tools are used on concrete floor grinders and concrete floor grinding machines.
In stainless steel industry, we bring many choices of tube belt sander, pipe belt sander, fillet weld grinder.
From the beginning of foundation, we position ourselves on high quality level but reasonable pricing all the time. After ten years of operations on the market, we have obtained widespread customer satisfaction and achieved great success through its reputation for excellence, top-notch quality and impeccable service.
Raizi tools have gone through the certificates issued by professional institute, such as GS and CE . More than 70% diamond tools and wet polishers have been exported to US, Latin America, South America, Europe, Africa, South East Asia and other countries in the past 10 years.
Our brief is “Good tools, easy work.”
Please give us a chance, we will offer you a copy of satisfaction.
Q1: Do you have your own brand?
Yes, our own brand name is as below:
Wet polishers, tube belt sander, concrete floor grinders: RAIZITM
Diamond polishing pads:
Premium: PhoenixTM
Standard: DiarichTM
Economy: TECOTM
We can also provide OEM and ODM services to our customers as well.
Q2: What are the main application fields of your tools?
Widely used in concrete surface preparation, concrete floor grinding, concrete floor polishing, stone fabrication, and stainless steel sanding.
Q3: What is the payment mode, terms and delivery time?
Payment mode: Paypal, Western Union, Moneygram, T/T.
Payment terms: 30% T/T in advance, 70% upon the B/L.
Our delivery time is 7-30 days upon order quantity in general.
Q4: What shipment solutions can you provide?
Urgent order with with small size and weight, we use courier express service such as DHL,TNT,FEDEX and UPS.
Normal regular order with weight over 45kgs but less 100kgs, we use Air Cargo.
Goods with big dimension or heavy weight, we use Sea Cargo.
We can ship to your assigned place in China to combine your shipment together.
We offer the advice according to actual situation and the customers make the decision.
