hid xenon kit

Types of HID Xenon Kit

An HID Xenon kit is a car headlight conversion kit. It helps to change standard halogen light bulbs into brighter and more efficient xenon gas bulbs. The HID kit has a ballast and one or two xenon bulbs. The ballast controls the power of the bulb. It also helps to change the low voltage from the car battery into high voltage. This makes the bulbs burn brighter. The kit comes in different types. They include:

• Standard HID Kit: This is the basic type. It has all the important parts needed to change halogen lights into HID lights. The parts include two xenon bulbs and two ballasts.
• H13 HID Kit: Most cars use the standard HID kit. But some cars with special headlights need the H13 hid xenon kit. The plugs on the ballast of this kit are different. This is so it can match the plugs on the car's headlight wires.
• Bi-LED Projector Lens: The Bi-LED projector lens is a special tool used to focus light better. It has tiny lenses that move around. These lenses help to spread the light from the bulbs more evenly. When they move, they cover more or less of the bulb. This makes a stronger and better light beam.
• Canbus HID Kit: Some newer cars have computers that control the headlights. These computers help to avoid errors and control the lights better. The Canbus HID kit is made for these new cars with computer controls. It has extra parts that let it talk to the car's computer. This helps to make sure the headlights work correctly.
• Single Beam vs Dual Beam: Single beam hid xenon kit bulbs have one filament inside. They give out one type of light, which is a stable and reliable beam. Dual beam bulbs have two filaments. They can create two types of light. For example, they can do low and high beams from one bulb. This is more efficient and saves space in the headlight.

Specifications and maintenance of Hid xenon kit

• Ballast

  The ballast is an important part of an HID Xenon kit. It controls the power going to the xenon lights. It uses smart technology to get a constant and accurate power supply. The ballast also helps the HID lights turn on and off safely, preventing damage. When taking care of the ballast, it is important to check connections and wires for any wear or moisture. Make sure the ballast stays dry and the wires stay clean. Also, ensure the ballast is not too hot, which can happen if there is poor airflow or overheating. A cool ballast will keep it working well for a long time.

• Bulbs

  The bulbs in the HID Xenon kit produce bright light using xenon gas and electrodes. Over time, the bulbs can become dimmer. It is important to check the brightness regularly. If one bulb is much darker than the other, it may be time to replace them. The color of the light may also shift from normal to too yellow or too blue. This is caused by the xenon gas breaking down. New bulbs will restore the correct color and brightness. Driving at night with old, dim, or discolored bulbs is dangerous. Other drivers may not see the vehicle, or the driver may not see pedestrians and obstacles. For safety, replace old bulbs as soon as they show signs of aging.

• Wiring

  Good wiring is important for the HID Xenon kit to work correctly. The wires should be checked often for any damage like tears, cracks, or burns. Loose connections should be tightened. Bad wiring causes problems like flickering lights or one bulb being dimmer. It can also make the ballast work harder, which shortens its life. Upgrading to heavy-duty wires prevents future issues. The thicker wires handle the high power better and last longer. Proper installation is also important. Following the instructions carefully and double-checking everything helps avoid wiring problems. For example, the positive and negative wires need to be connected correctly to the battery.

How to choose hid xenon kit

Choosing the right HID Xenon kit for a particular vehicle requires consideration of several factors. These include;

• Compatibility

  This involves ensuring that the HID Xenon kit is compatible with the vehicle. The kits come with different sizes and types, which correspond to various headlight bulb designs. The vehicle's make, model, and year of production should be considered to determine the correct bulb size.

• Color temperature

  The color temperature of the HID Xenon kit affects the light color produced. It is measured in Kelvin (K). Choices of color temperatures available range from 4000K to 12000K. While 4000K gives a warm white light similar to halogen, higher values produce brighter lights with a bluish tint. The choice should be based on personal preferences and the typical driving conditions.

• Brightness and lumen output

  The brightness of the HID Xenon kit headlights is an important consideration. This is because excessively bright lights can be blinding to oncoming drivers, while low brightness can compromise visibility. It is important to choose a kit with a lumen output that provides adequate illumination without being excessive.

• Quality and reliability

  The quality and reliability of the HID Xenon kit should be considered. This is to ensure long-lasting and consistent performance. While there are several aftermarket kits available, it is advisable to choose those from reputable brands. This is to avoid poor quality products that can affect the vehicle's electrical system or provide inadequate lighting.

• Ease of installation

  The ease of installing the HID Xenon kit should also be considered. Some kits come with plug-and-play designs that allow for easy installation without any modifications. Others may require additional wiring or installation of an ignition relay. It is advisable to choose a kit that is easy to install, especially if one intends to do it by oneself.

• Warranty and support

  Consideration should be given to the warranty and customer support offered by the manufacturer. This gives an assurance of the quality of the product and provides assistance in case of any issues. Some manufacturers offer a limited warranty period, while others provide customer support services.

How to DIY and Replace of hid xenon kit

Most car owners prefer to have their HID Xenon light kits installed by professionals. However, the installation process is simple and straightforward, allowing them to take on the project themselves. If the installation is done correctly, the lights will work efficiently and effectively for many years. Before starting the project, it is important to read the installation manual provided by the manufacturer. The steps might differ slightly depending on the model and make of the car as well as the HID Xenon kit.

• 1. Turn off the car's engine and ensure that the battery is disconnected to avoid electric shock or short-circuiting.
• 2. Remove the stock halogen bulbs and put on the new HID bulbs. Ensure that the bulbs are the right size and fit into the housing without forcing them.
• 3. One side at a time, open the car hood and remove the rubber dust covers to access the headlight assembly.
• 4. Take one ballast and connect the two cables coming out of the bottom to the battery. This will provide power to the ballast. The cables are usually labeled positive and negative.
• 5. Mount the ballast on the side of the engine using the provided screws or velcro. Some kits may also offer mounting brackets. The ballast should be mounted in a dry area away from heat sources.
• 6. Connect the ballast to the HID bulb. The connector plugs into the back of the bulb and is usually a one-way fit.
• 7. Secure the wires to avoid them from interfering with the car's moving parts or the engine.
• 8. Refit the rubber dust cover to keep dirt and moisture from getting inside the headlight housing.
• 9. Turn on the engine and test the new headlights. Ensure that they are working properly and are aimed correctly.

Q and A

Q: What is an HID Xenon kit for cars?

A: An HID (High-Intensity Discharge) Xenon kit is a car headlight conversion kit that allows the replacement of traditional halogen headlights with xenon gas-ignited bulbs. The bulbs produce a brighter, whiter light than halogen bulbs.

Q: What is the difference between HID and LED lights?

A: HID lights use a gas (xenon) to create an electric arc, while LED lights have a semiconductor that emits light when an electric current passes through it. As a result, LEDs tend to have a brighter output and a longer lifespan than HID lights.

Q: Can I install an HID Xenon kit myself?

A: Yes, the HID Xenon kits are designed for DIY installation, and many come with instructions. However, it's essential to ensure that the kit is compatible with the vehicle and that the installation is done correctly for safety and optimal performance.